Please direct any questions about the products we carry to sales@sodaaudio.com. We are happy to help.
Active 3- Way Line-Array Module, 1x 8” Neo Woofer,
Bandpass Design, 1x 6.5” hornloaded Neo Midrange Woofer
incl. Phaseplug, 2x1” Neo Compression Driver with 100°x15°
CD-Horn, integrated Class- T Amp, 420 W / RMS, 24-bit DSP
96 KHz Sampling_Rate, 24-Bit AD-Converter, analog input
limiter + 3-Band Compressor, PFC-Switchmode Supply,
Polypropylen-Plastic Housing with integrated Flyware, 16
switchable presets, XLR-Input, XLR-Paralell-Output, Neutrik
PowerCon incl. Slave-Out, 80 – 19.000 Hz, 128 dB SPL peak.
Dimesions: 23" x 9.5" x 13", Weight: 30.5 lbs
Power Cable Included. Please specify DPC-15, or C01
A three-way active line array system, the DVA T4 has set new
standards in the sound reinforcement industry since its 2007 market
launch. Better yet, it has brought the benefits of real line array
technology to a much wider range of users. More than 15,000 DVA T4
modules have shipped as of February 2011. Equipped with top-notch
features and engineered for maximum versatility, the DVA T4 delivers
premium performance and ensures excellent return on investment.
• 8 modules (2 m array) connected to one 16A phase place just 125 kg load on the pick-point
• Fully powered units, freely scalable to setups of any size
• Lossless signal path with no need for speaker cables
• None of the impedance and amp channel availability concerns associated with passive models
• Sequentially configurable array segments
• Digital controller (DSP) onboard for utmost operating safety
The future of line arrays is active
Beside the accurate
reproduction of a 3-way system with active DSP controlled amplification
and all other advantages of active technology like phase- and line
alignment, the active technology gives the advantage to optimize each
Array-element due to its position in the system and the total number of
combined line array units. The DVA T4 provides 8 different Setups to
optimize for example the HF-response according to it's function
(nearfield/midfield/farfield) or the low-mid-response due to the number
of combined units. No lossfull and expensive speaker cabling is needed
anymore.
Constant directivity
The
DVA T4 Top is equipped with a constant directivity horn for the High
and Mid section and offers a nominal coverage angle of 100°x15°. The
CD-Horn provides high flexibility and a good natured attitude if for
instance the Array is not aligned correctly. The DVA uses apart from the
formation of cylindrical waves (very much depending on the number of T4
elements) the vector summing of the individual horns. This means that
with growing distance to the source (if set up correctly) the listener
perceives more and more vector sums of the single elements. However it
has to be considered, that the fewer elements are used to spread the
sound to a specific area, the stronger must be the curving of them.
That’s how the effect of optimised SPL distribution is managed.
The wide frequency response from 80 - 19.000Hz and the horizontal dispersion of 15° offers flexible handling without additional Subwoofer e.g. for background-music and speech. For other applications like live music the matching Subwoofer SUB S20 can be added to the system. The integrated digital Class-T™ Amplifier provides a power of 420 Watt/RMS with an efficiency of 90% and drives the system three ways active. The innovative Class-T™ design offers in comparison to other digital amplifiers an outstanding sound quality with superb high-frequency sound, equal to a Class A/B circuit. The integrated 24-Bit DSP operates the active crossover, the active EQ, the Limiter-control and all safety-circuits. In addition to that, the DVA T4 is equipped with an innovative power-factor-corrected power supply, operating from 85 to 260 V which allows up to eight DVA T4 to be connected to one 16 amp AC-braker.
Speaker Type | 3-Way Active Line Array Module |
Frequency Response [+/- 3dB] | 80 - 19.000 Hz |
Max SPL | One Unit: 128 dB |
HF | 2x1 " |
Type HF | Neodymium Compression Driver |
Voice Coil HF | 1.4 " |
Directivity | 100x15 ° |
Horn | Integrated CD Horn |
MF | 6.5 " |
Type MF | Neodymium Sealed Basket Phase Plug Horn Loaded |
Voice Coil MF | 1.5 " |
LF | 8 " |
Type LF | Neodymium |
Voice Coil LF | 2.5 " |
Amp Technology | Digital Class-T, var. clock frequency |
Amp Class | Class D |
Power Supply | with PFC SMPS |
HF Amp | 100 W/RMS |
MF Amp | 100 W/RMS |
LF Amp | 220 W/RMS |
Cooling | Convection |
Controller | Analog Devices DSP 24 bit/48 kHz |
System Presets | 8, HF/Low-mid correction |
Limiter | Dual Active Limiter Multibandlimiiter RMS, Peak, Thermal |
Crossover Frequency MF-HF | 1800 Hz |
Slope MF-HF | 24 dB/Octave |
Crossover Frequency LF-MF | 400 Hz |
Slope LF-MF | 24 dB/Octave |
Signal Input | 1x XLR fem, sym |
Input Sensitivity [dBu] | -00 - Max -2 dBu |
Signal Output | 1x XLR male, sym. |
Power Socket | 1x Powercon In 1x Powercon Out |
Voltage Range | 90 - 240 V |
Housing | Polypropylen PP |
Housing Design | Trapezoidal |
Color | Black, White |
Handles | 1x per side |
Front Grille | 1.5mm metall grille with acoustic foam in back |
Rigging Points | Integrated rigging hardware |
Width | 580 mm (23.2 in) |
Height | 240 mm (9.6 in) |
Depth | 327 mm (13.08 in) |
Weight | 13.8 kg (30.42 lbs) |
All Right Reserved Solid Design Audio - 2012 - - 213-330-0457 - CA Seller's Permit # 102-203204
Ecommerce Software by Shopify. Designed by PixelUnion.