BAG END INFRA MXB Processor

Please direct any questions about the products we carry to sales@sodaaudio.com. We are happy to help.

The Bag End INFRA-MXB system module is a two-channel loudspeaker controller designed for stere 2-way operation with a mono sum INFRA low frequency output. The INFRA-MXB incorporates the INFRA dual integrator, frequency dividing, and system protection in an easily operated configuration where the system parameters are internally preset or available on front panel rotary controls.

Features
• 18Hz INFRA dual integrator
• CVR hi pass limiting
• INFRA Dynamic Filter
• Balanced inputs
• Internal frequency modifications
• Convenient front panel controls
• 2-way stereo or 3-way mono mode
• Use INFRA output with INFRA Loudspeakers only

General Specifications
 • Input Connectors: XLR female
 • Input Configuration: Balanced
 • Alternate Input Configuration: Unbalanced
 • Maximum Input Signal: 4.5V (+16 dBu)
 • Output Connectors: XLR male
 • Output Configuration: Unbalanced
 • Maximum Output Signal: 4.5V (+16 dBm)
 • Nominal Output Impedance: 50 ohms
 • Power-on Indication: Green LED
 • Operating Input Voltage: 12-15 VDC
 • Operating Current Required: 200 mA
 • Input Voltage Connector: Miniature DC 2.5 mm
 • Input Voltage Polarity: Center pin +

INFRA Specifications
 • Maximum INFRA Gain: 10 dB
 • Maximum INFRA Attenuation: 10 dB
 • INFRA Cutoff Frequency Programming: Plug in resistors
 • INFRA Cutoff Frequency: 8Hz to 40Hz, factory set to 18Hz
 • INFRA Output Mode: Sum in Stereo Mode
 • Nominal Dynamic Filter Threshold: 0 dBu Output
 • Minimum Dynamic Filter Threshold: -10 dBu Output
 • Maximum Dynamic Filter Threshold: +10 dBu Output
 • Maximum Dynamic Filter Reduction Capability at 18Hz: 30 dB
 • Dynamic Filter Threshold Exceeded Indication: Red LED
 • INFRA Circuit Noise: <-90 dBu (20Hz to 20kHz)
 • INFRA Dynamic Range: >105 dB (20Hz to 20kHz) (bandwidth unweighted)

Hi Pass Specifications
 • Maximum Hi Pass Gain: 10 dB
 • Maximum Hi Pass Attenuation: 10 dB
 • Hi Pass Filter Frequency Programming: Plug In Resistors
 • Factory Set Hi Pass Filter Frequency: -3 dB @ 130 Hz/-6 dB @ 97 Hz
 • Hi Pass Filter Frequency Range: 50 Hz to 200 Hz
 • Hi Pass Filter Slope: 12 dB/octave
 • Hi Pass Circuit Noise: <-85 dBu (20Hz to 20kHz)
 • Hi Pass Dynamic Range: >105 dB (20Hz to 20kHz) (bandwidth unweighted)

Physical Specfications
 • Enclosure: Black powder coated steel
 • Enclosure Mounting: 1U EIA rack (1.75")
 • Dimensions (H x W x D): 1.75" x 19" x 5.25"
 • Weight: 5 lbs
 • Shipping Dimensions: 6" x 22" x 12"
 • Shipping Weight: 7 lbs